Xinxiang Flight Fasteners Co., Ltd.
Seiko quality, within reach
Add to Cart
Product information
When the bolt socket is used for repair, it can be said that it has the effect of resuscitation, allowing the damaged machinery to run well, just like many machines are likely to be scrapped due to a rivet problem, but you use the bolt socket It's different, it can make the machine run well. The bolt sleeve has a smooth appearance, simple and easy to understand, does not care about the environment, and at the same time has the characteristics of no rust, to avoid the use of the machine due to rust, which will cause unnecessary losses.
Loosening caused by compression of the bearing surface. Due to the large contact stress on the bearing surface of the bolt head or nut, the surface of the connected part will have a plastic ring-shaped depression. In use, if plastic deformation continues to occur (called bearing surface depression), the elongation of the bolt will decrease, the pre-tightening force in the bolt will decrease, and the nut will easily loosen and rotate.
Specification
| Color | Natural colour |
| Application | Light alloy, heavy industry, medical treatment, foundry industry, others |
| Brand Name | AVIC-Flight |
| Standard | KKV |
| Material | Stainless steel SUS303 |
| Model | Thin wall, Heavy duty |
| Metric Thin wall Type (Leave message for Metric Heavy Duty/BritishThin Wall/British Heavy Duty) | |||||||
| Internal Thread Class GH mm | External Thread Class GG mm | Length mm | Tap Drill mm | Thread Tap Class GH mm | Tap Depth Mn. mm | Removal Drill mm | Removal Depth mm |
| M5×0.8 | M8×1.25 | 8 | 6.9 | M8×1.25 | 9.5 | 5.5 | 4 |
| M6×1.0 | M10×1.25 | 10 | 8.8 | M10×1.25 | 11.5 | 7.5 | 4.75 |
| M8×1.25 | M12×1.25 | 12 | 10.8 | M12×1.25 | 13.5 | 9.5 | 4.75 |
| M8×1.0 | M12×1.25 | 12 | 10.8 | M12×1.25 | 13.5 | 9.5 | 4.75 |
| M10×1.5 | M14×1.5 | 14 | 12.8 | M14×1.5 | 15.5 | 11.5 | 4.75 |
| M10×1.25 | M14×1.5 | 14 | 12.8 | M14×1.5 | 15.5 | 11.5 | 4.75 |
| M12×1.75 | M16×1.5 | 16 | 14.75 | M16×1.5 | 17.5 | 13.5 | 4.75 |
| M12×1.25 | M16×1.5 | 16 | 14.75 | M16×1.5 | 17.5 | 13.5 | 4.75 |
Advantage
Improve the connection conditions and increase the bearing capacity and fatigue strength of the threaded connection: the use of type threaded sleeves can eliminate the pitch and thread deviation between the screw and the screw hole, so that the load is evenly distributed, thereby improving the load-bearing capacity and fatigue resistance of the threaded connection strength. It can be used for the connection and fastening of hard, brittle and fragile materials such as ceramics, bakelite, and glass. Effectively prevent fragmentation. After using the bolt sleeve, under the same strength condition as the ordinary internal thread, a smaller size and higher strength screw can be selected, so that a large amount of material can be saved, weight and volume can be reduced.
The principle that the bolt sleeve enhances the connection strength of the aluminum alloy internal thread: the standard internal thread has the angle error and the pitch error of the thread processing, resulting in the small contact surface between the bolt and the thread in the base, and even point contact occurs. The uneven force of the bolt or base thread reduces the strength and fatigue life of the threaded connection.
Application
1. Quickly and effectively repair damaged threads on a variety of materials.
2, the reinforcing thread strength lightweight material, such as medium-sized non-ferrous metal casting, die casting base material and the toughness of the ferrous metals, are often used as the screw is screwed into the screw.
3. It is especially suitable for use in environments requiring high-strength internal threads, with strong seismic and pull-out resistance. It has higher strength than commonly used wire thread inserts, and is firmly connected to the base body, and will not be separated from the base body even when working under shock or vibration environment.
4. Remedy the wrong hole and avoid reprocessing the wrong part.
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 3-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment≤4000USD, 100% in advance. Payment≥4000USD, 30% T/T in advance ,balance before shippment.
Q: Do you accept customization?
A: Yes, we can accept the customization of material, specification, painting color, length accuracy, and certain non-standard products