6H Plastic Threaded Inserts

Brass Insert Nuts With Good Performance Of Torsion And Tension , 6H Plastic Threaded Inserts

Introduction

For different types of plastics, the principle of choosing plastic inserts is roughly as follows:

1. The crystalline plastic is relatively insensitive to stress, so all kinds of nuts can be applied
2. Amorphous plastic is very sensitive to stress. When choosing the nut type, avoid sharp knurling. Special care should be taken for those plastic parts that need to be electroplated for the screen. Pickling of the plastic parts with embedded nuts will cause serious cracking. It is best to first electroplating and embed the nuts.
3. Thermosetting plastics are not suitable for hot-melt and ultrasonic implantation of nuts. If necessary, you can choose precise and sharp knurled nuts to press in.

Material

• Brass C360-4> is the most commonly used material for Lifan Precision Hardware. Because brass has comprehensive properties such as strength, toughness, and corrosion resistance, comprehensive structural parts are required. The processing performance is very good, and the processing cost is the lowest;
• The performance of environmentally friendly brass particles is the same as that of brass, but the content of harmful substances in the six major standards is almost the same, which can meet the previous environmental protection standards; but the material manufacturing and processing performance is also worse than that of standard brass;
• Stainless steel SUS303-, good hardness, corrosion resistance, better performance than brass, performance is slightly worse, but the processing cost is much higher. Use in occasions with special requirements;
• The strength of each alloy is smaller and smaller than that of brass, but the volume is larger, larger, and smaller; this kind of particles has a remarkable feature and can be used for color surface treatment. The decorative effect is more obvious;

Feature

• Diamond flower: easy knurling curve, shallow knurling, massage control embedding process, not suitable for hot-melt process, good performance in process.
• Twill flower: The knurling area and depth of the villain are easy to control, and it has a self-directed function when implanted, and the overall performance of torsion and tension is good.
• The knurling standard of Lijingfan hardware implements the DIN82 standard.
• The torsion force of the knurling is related to the traction angle: with the angle of the rising value, the tensile force becomes larger and larger; the heating value increases slightly

Parameter

Why Choose Us?

1. A factory with more than 20 years' experience in manufacturing of Thread Inserts.
2. Competitive pricing & military quality.
3. Quick replies to quotations and requests for information.
4. Timely deliveries, rich experience in IMP and EXP.
5. Advanced R & D center, more than one thousand types of threaded inserts and tools.
6. Strict quality control system, passed the SGS and ISO9001: 2015.
7. Quality tools & products, as good as heli-coil, Keensert, Ensat and etc.
8. Comprehensive after-sales support and troubleshooting.
9. Famous brands in China .
10. High quality enterprises in the region.